Benzene, Toluene, Ethylbenzene, Xylene (BTEX) Analyzer Sensor
Features:
- All-in-One Compact Housing, Built-in Transmitter and Sensors
- Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
- Plug & Play, On-line Realtime Measurement
- Ultra Low Power Consumption, Ideal for Outdoor Applications
- 1500 N Tensile Strength Kevlar Reinforced Cable
- Surge Protection for Power and RS485 Communication
- RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
- Sapphire Glass Windows to Prevent Scratch
- Innovative Nano Coating to Remain Window Clean
- Auto Cleaning Wiper, Less Maintenance
- Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
- AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
- IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification
Specification:
| General | |
| Output Signal | RS485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional) |
| Data Resolution | 16 bits (0.001% FS) |
| Surge Protection | 1,500 VDC |
| Power | 5~12 VDC, 118 mA |
| Protection | Polarity, Overload, Short circuit |
| Safety | CE, FCC |
| UNIT BTEX | |
| Parameter | Benzene, Toluene, Ethylbenzene, Xylene |
| Measurement Method | Fluorescence |
| Measurement Range | 0~100 mg/L |
| Accuracy | ±5% in standard solution |
| Resolution | 0.01 mg/L |
| Repeatability | ±3% in standard solution |
| Light source | LED 254 nm |
| Operation pressure | Max. 10 Kgf/cm² |
| Operating temperature | 0~50 °C |
| Process flow rate | 0.1~10 m/s |
| Calibration Interval | Typical 24 months |
| Response time | 3 secs |
| Protection | IP68 |
| Connection | 16X1.5 plug fixed cable, M12 connector, 5 pin |
| Housing | SS316L; Titanium |
| Cable | Kevlar reinforced PUR cable, 1500N tensile strength |
| Dimension | ø 22Χ130 mm (no wiper) ; ø 39Χ186 mm (with wiper) |
| Weight | analyzer: approx. 500 g (SS316L); 400 g (Titanium) ; cable: 80 g/m |
Untuk tanya Harga silakan hubungi kami.
Butuh Solusi untuk Kebutuhan Anda?
Temukan produk, layanan, dan solusi instrumentasi yang sesuai dengan kebutuhan industri, laboratorium, dan monitoring lingkungan Anda.
1 minute
Artikel Terkait
1 minute
Benzene, Toluene, Ethylbenzene, Xylene (BTEX) Analyzer Sensor
Features:
- All-in-One Compact Housing, Built-in Transmitter and Sensors
- Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
- Plug & Play, On-line Realtime Measurement
- Ultra Low Power Consumption, Ideal for Outdoor Applications
- 1500 N Tensile Strength Kevlar Reinforced Cable
- Surge Protection for Power and RS485 Communication
- RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
- Sapphire Glass Windows to Prevent Scratch
- Innovative Nano Coating to Remain Window Clean
- Auto Cleaning Wiper, Less Maintenance
- Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
- AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
- IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification
Specification:
| General | |
| Output Signal | RS485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional) |
| Data Resolution | 16 bits (0.001% FS) |
| Surge Protection | 1,500 VDC |
| Power | 5~12 VDC, 118 mA |
| Protection | Polarity, Overload, Short circuit |
| Safety | CE, FCC |
| UNIT BTEX | |
| Parameter | Benzene, Toluene, Ethylbenzene, Xylene |
| Measurement Method | Fluorescence |
| Measurement Range | 0~100 mg/L |
| Accuracy | ±5% in standard solution |
| Resolution | 0.01 mg/L |
| Repeatability | ±3% in standard solution |
| Light source | LED 254 nm |
| Operation pressure | Max. 10 Kgf/cm² |
| Operating temperature | 0~50 °C |
| Process flow rate | 0.1~10 m/s |
| Calibration Interval | Typical 24 months |
| Response time | 3 secs |
| Protection | IP68 |
| Connection | 16X1.5 plug fixed cable, M12 connector, 5 pin |
| Housing | SS316L; Titanium |
| Cable | Kevlar reinforced PUR cable, 1500N tensile strength |
| Dimension | ø 22Χ130 mm (no wiper) ; ø 39Χ186 mm (with wiper) |
| Weight | analyzer: approx. 500 g (SS316L); 400 g (Titanium) ; cable: 80 g/m |
Untuk tanya Harga silakan hubungi kami.
