Colored Dissolved Organic Matter Analyzer Sensor
[wptab name=’Fitur’]
- All-in-One Compact Housing, Built-in Transmitter and Sensors
- Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
- Plug & Play, On-line Realtime Measurement
- Ultra Low Power Consumption, Ideal for Outdoor Applications
- 1500 N Tensile Strength Kevlar Reinforced Cable
- Surge Protection for Power and RS485 Communication
- RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
- Sapphire Glass Windows to Prevent Scratch
- Innovative Nano Coating to Remain Window Clean
- Auto Cleaning Wiper, Less Maintenance
- Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
- AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
- IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification
[/wptab]
[wptab name=’Spesifikasi’]
| GENERAL | |
| Output Signal | RS485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional) |
| Data Resolution | 16 bits (0.001% FS) |
| Surge Protection | 1,500 VDC |
| Power | 5~12 VDC, 118 mA |
| Protection | Polarity, Overload, Short circuit |
| Safety | CE, FCC |
| UNIT Colored Dissolved Organic Matter Analyzer | |
| Measurement Method | Fluorescence |
| Measurement Range | 0~3,000 ppb (μg/L) |
| Accuracy | Linearity R² > 0.999 for serial dilution of Quinine Sulfate solution equivalents in 0.1 N H2SO4 at concentrations ranging from 0~300 μg QL L-1 |
| Resolution | 0.01 μg/L |
| Repeatability | ±1% FS |
| Light source | LED 355 nm |
| Operation pressure | Max. 10 Kgf/cm² |
| Operating temperature | 0~50 °C |
| Process flow rate | 0.1~10 m/s |
| Response time | 3 secs |
| Calibration Interval | Typical 24 months |
| Protection | IP68 |
| Connection | M16X1.5 plug fixed cable, M12 connector, 5 pin |
| Cable | Kevlar reinforced PUR cable, 1500N tensile strength |
| Housing | SS316L; Titanium |
| Dimension | ø 22Χ130 mm (no wiper) ; ø 39Χ186 mm (with wiper) |
| Weight | analyzer: approx. 500 g (SS316L) ; 400 g (Titanium) ; Cable: 80 g/m |
[/wptab]
[end_wptabset]
Harga: hubungi kontak kami
Butuh Solusi untuk Kebutuhan Anda?
Temukan produk, layanan, dan solusi instrumentasi yang sesuai dengan kebutuhan industri, laboratorium, dan monitoring lingkungan Anda.
Artikel Terkait
Colored Dissolved Organic Matter Analyzer Sensor
[wptab name=’Fitur’]
- All-in-One Compact Housing, Built-in Transmitter and Sensors
- Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
- Plug & Play, On-line Realtime Measurement
- Ultra Low Power Consumption, Ideal for Outdoor Applications
- 1500 N Tensile Strength Kevlar Reinforced Cable
- Surge Protection for Power and RS485 Communication
- RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
- Sapphire Glass Windows to Prevent Scratch
- Innovative Nano Coating to Remain Window Clean
- Auto Cleaning Wiper, Less Maintenance
- Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
- AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
- IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification
[/wptab]
[wptab name=’Spesifikasi’]
| GENERAL | |
| Output Signal | RS485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional) |
| Data Resolution | 16 bits (0.001% FS) |
| Surge Protection | 1,500 VDC |
| Power | 5~12 VDC, 118 mA |
| Protection | Polarity, Overload, Short circuit |
| Safety | CE, FCC |
| UNIT Colored Dissolved Organic Matter Analyzer | |
| Measurement Method | Fluorescence |
| Measurement Range | 0~3,000 ppb (μg/L) |
| Accuracy | Linearity R² > 0.999 for serial dilution of Quinine Sulfate solution equivalents in 0.1 N H2SO4 at concentrations ranging from 0~300 μg QL L-1 |
| Resolution | 0.01 μg/L |
| Repeatability | ±1% FS |
| Light source | LED 355 nm |
| Operation pressure | Max. 10 Kgf/cm² |
| Operating temperature | 0~50 °C |
| Process flow rate | 0.1~10 m/s |
| Response time | 3 secs |
| Calibration Interval | Typical 24 months |
| Protection | IP68 |
| Connection | M16X1.5 plug fixed cable, M12 connector, 5 pin |
| Cable | Kevlar reinforced PUR cable, 1500N tensile strength |
| Housing | SS316L; Titanium |
| Dimension | ø 22Χ130 mm (no wiper) ; ø 39Χ186 mm (with wiper) |
| Weight | analyzer: approx. 500 g (SS316L) ; 400 g (Titanium) ; Cable: 80 g/m |
[/wptab]
[end_wptabset]
Harga: hubungi kontak kami
