Telp. 02273518599 | Wa. 081122333715 | Email. [email protected]
Optical Biochemical Oxygen Demand Analyzer
Features:
- Solution Without Cabinet, Robust IP 68 Water Submersible Enclosure
- On-line Realtime Measurement 1 second
- Ideal for Outdoor Applications , 0.2 W Ultra Low Power Consumption
- Drift Free , High Reliability
- RS485 Communication , Surge Protection for Power , Lightening
- Engineering Cost , 1.2 Km RS 485 Digital Communication, Minimize Cabling
- Data Monitoring and Software Configuration Calibration
- HMI, Direct Connected with PLC , Eliminate I/O Module Cost , Standard Modbus RTU Protocol
- Almost No Maintenance , Auto Cleaning
- Compensation , Turbidity or Total Suspended Solids Measurement
- Distribute to various fields sitest lab , onboard memory allowing users to easily calibrate , configure sensor at lab , distribute to various fields sites , configure sensor at lab
- Turbidity Compensation
Specification:
| Measurement range | 46-1: 0 – 25 mg/L 46-2: 0 – 100 mg/L 46-3: 0 – 500 mg/L 46-4: 0 – 1,000 mg/L 46-5: 0 – 5,000 mg/L |
| Accuracy | ± 5% in standard solution ± 1 mg/L |
| Resolution | 0.01 mg/L |
| Repeatability | ± 3% in standard solution ± 1 mg/L |
| Light source | LED 254 nm |
| Beam angle | 180° |
| Light path length | 1 mm, 2 mm, 5 mm, 10 mm, 35 mm |
| Process flow rate | Max. 3 m/sec |
| Operation pressure | Max.10 Kg f/cm2 |
| Operating temperature | 0~85 °C |
| Response time | < 1 min |
| Protection | IP 68 |
| Temperature sensor | Pt 100 |
| Temperature measurement range | 0 – 85 °C |
| Temperature accuracy | ± 0.5 °C |
| Turbidity sensor | LED 880 nm |
| Turbidity measurement range | 46-1: 0 – 50 NTU (or 0 – 100 mg/L) 46-2: 0 – 500 NTU (or 0 – 1,000 mg/L) 46-3: 0 – 2,000 NTU (or 0 – 5,000 mg/L) 46-4: 0 – 4,000 NTU (or 0 – 10,000 mg/L) 46-5: 0 – 10,000 NTU (or 0 – 20,000 mg/L) |
| Turbidity accuracy | ± 5% FS |
| Turbidity sensor | LED 880 nm |
| Housing | SS 316 L; Titanium |
| Dimension | 40 Χ 240 mm |
| Weight | Analyzer: approx. 1 Kg; Cable: 80 g/m |
