Total Chlorine Analyzer

Total Suspended Solids Analyzer

Robust IP 68 Water Submersible Enclosure , Solution Without Cabinet
Online Realtime Measurement 1 second
0.2 W Ultra Low Power Consumption , Ideal for Outdoor Applications
Temperature Compensation
Standard Modbus RTU Protocol , Eliminate I/O Module Cost , Direct Connected with PLC , HMI
No Moving Parts , Drift Free , High Reliability
Surge Protection for Power , Lightening , RS 485 Communication
Minimize Cabling , 1.2 Km RS 485 Digital Communication
Almost No Maintenance , Auto Cleaning
Almost No Consumable , No Reagent , Membrane
Not Affected by Pressure Fluctuation 1 – 15kg f/cm2
pH Compensation 6 – 8
Integration Additional Sensors such as Conductivity , TDS/ORP
Onboard memory allowing users to easily calibrate , Engineering Cost
Software Configuration Calibration , Distribute to various fields sites , Data Monitoring configure sensor at lab

Measurement range	1: 0 – 5 mg/L ; 0 – 20 mg/L (Optional) 2: 0 – 5 mg/L (Including pH compensation)
Accuracy	0.01 mg/L (0 -0.5 mg/L); 0.02 mg/L (0.5 – 2 mg/L) ; 0.1 mg/L (2 – 5 mg/L)
Resolution	0.01 mg/L
Repeatability	± 1% FS
Temperature compensation	0 – 50 °C
Automatic pH compensation	6 – 10 pH (Type 2)
Process flow rate	Min. 0.8 l/min
Auto cleaning	Rotating glass ball
Electrode material	Glass, Silver/Silver Chloride (Cathode), Platinum (Anode)
Operating pressure	Max. 6 Kg f/cm2²
Operating temperature	0 – 50 °C
Response time	1 sec
Protection	IP 68
Temperature Sensor	Pt 100
Temperature measurement range	0 – 50 °C
Temperature accuracy	± 0.5 °C ; ± 0.1 °C (Optional)
Housing	Acrylic
pH Sensor
Measurement range	0 – 14 pH
Accuracy	0.01 pH
Resolution	0.01 pH
Repeatability	± 1 % FS
Operating pressure	Max. 10 Kg f/cm² (Optional)
Operating temperature	0 – 50 °C
Process flow rate	0.1 l /min
Response time	1 sec
Dimension	Total chlorine analyzer: 152(W) x 168(H) x 118(D) mm Total chlorine & pH analyzer: 215(W) x 300(H) x 155(D) mm
Weight	Total chlorine analyzer: approx. 300g Total chlorine & pH analyzer: approx. 500g ; Cable: 80 g/m

Measurement range	3: 0 – 5 mg/L 4: 0 – 10 mg/L 5: 0 – 20 mg/L
Accuracy	± 3 % FS
Resolution	0.01 mg/L
Repeatability	± 3 % FS
Repeatability	Max. 6 Kg f/cm2
Operating temperature	0 – 50 °C
Process flow rate	0.1 l/min
Response time	1 sec
Protection	IP 68
Temperature Sensor	Pt 100
Temperature measurement range	0 – 50 °C ; ± 0.1 °C (Optional)
Temperature accuracy	± 0.5 °C
Process Connection	M 26 x 1.5
Sensor Material	Glass, Silver/Silver Chloride (Cathode), Platinum (Anode)
Housing Material	POM ; SS 316 L ; Titanium
Dimension	40 Χ 360 mm
Weight	Analyzer: approx. 150 g (POM) ; 500 g (SS 316 L) ; 400 g (Titanium) Cable: 80 g/m ; cable: 80 g/m