Free Chlorine Analyzer

Solution Without Cabinet , Robust IP 68 Water Submersible Enclosure
1 sec Online Realtime Measurement
Ideal for Outdoor Applications , 0.05 W Ultra Low Power Consumption
Temperature Compensation
Drift Free , High Reliability , No Moving Parts
Surge Protection for Power , Lightening , RS 485 Communication
1.2 Km RS 485 Digital Communication, Minimize Cabling , Engineering Cost
Software Configuration Calibration , Data Monitoring
Standard Mod bus RTU Protocol , Direct Connected with PLC , HMI , Eliminate I/O Module Cost
Almost No Maintenance , Auto Cleaning
Almost No Consumable , No Reagent , Membrane
Not Affected by Pressure Fluctuation 1-15 kg f/cm2
pH Compensation 5-9
TDS or ORP , Integration Additional Sensors such as Conductivity
On board memory allowing users to easily calibrate , Distribute to various fields sites, Configure sensor at lab

Measurement range	1: 0 – 5 mg/L 2: 0 – 5 mg/L (Including pH compensation)
Accuracy	0.01 ppm (0 – 0.5 ppm) ; 0.02 ppm (0.5 – 2 ppm) ; 0.1 ppm (2 – 5 ppm)
Resolution	0.01 mg/L
Repeatability	± 1% FS
Temperature compensation	0 – 85 °C
Automatic pH compensation	5 – 9 pH (Type 2)
First setup time	4 hours
Process flow rate	Min. 0.8 l/min
Auto cleaning	Rotating glass ball
Electrode material	Platinum (Cathode), Copper (Anode)
Operating pressure	0 – 10 Kg f/cm²
Operating temperature	0 – 85 °C
Response time	3 secs
Protection	IP 68
Temperature Sensor	Pt 100
Temperature measurement range	0 – 65 °C
Temperature accuracy	± 0.5 °C ; ± 0.1 °C (Optional)
Housing	Acrylic
pH Sensor
Measurement range	0 – 14 pH
Accuracy	± 0.05 pH
Resolution	0.01 pH
Repeatability	± 1% FS
Operating pressure	Max. 10 Kgf/cm² (Optional)
Operating temperature	0 – 85 °C
Process flow rate	0.1l /min
Response time	1 sec
Dimension	1: 152(W) x 168(H) x 118(D) mm 2: 215(W) x 300(H) x 155(D) mm
Weight	1 analyzer: approc. 300g 2 analyzer: approc. 500g ; cable: 80 g/m

Measurement range	3: 0 – 5 mg/L 4: 0 – 10 mg/L 5: 0 – 20 mg/L
Accuracy	± 3 % FS
Resolution	0.01 mg/L
Repeatability	± 3 % FS
Operating pressure	Max. 10 Kgf/cm²
Operating temperature	-5 – 70 °C
Process flow rate	0.1 l /min
Response time	1 sec
Temperature sensor	IP 68
Temperature measurement range	-5 – 70 °C
Temperature accuracy	± 0.5 °C ; ± 0.1 °C (Optional)
Protection	Pt 100
Process Connection	M 26 x 1.5
Sensor Material	Glass, Silver/Silver Chloride (Cathode), Platinum (Anode)
Housing Material	POM
Dimension	40 Χ 360 mm
Weight	Analyzer: approx. 150 g (POM); 500 g (SS 316 L) ; 400 g (Titanium) cable: 80 g/m