Dissolved Oxygen Analyzer
Tanpa persyaratan kalibrasi dan konsumsi oksigen, pengukuran Dissolved Oxygen Analyzer memungkinkan dalam semua situasi, terutama di lingkungan konsentrasi oksigen yang sangat rendah.
[wptab name=’Fitur’]
- Onboard memory allowing users to easily configure , calibrate sensor at lab , distribute to various fields sites
- Solution without cabinet and water submersible enclosure
- Online real time measurement 1 second
- Ideal for out door applications , 0.02W ultra low power consumption
- Drift free and high reliability
- Digital communication 1.2 Km RS 485, minimize cabling , engineering cost
- Data monitoring software and configuration calibration
- Standard modbus RTU protocol, direct connected with PLC, HMI, and eliminate I/O module cost
- Temperature compensation
- Lightening and surge protection for power
[/wptab]
[wptab name=’Spesifikasi’]
| Measurement range | 0 – 20 ppm (mg/L) (0 – 200%) |
| Accuracy | ± 1% FS (0 – 20 ppm) |
| Resolution | 0.01 ppm (mg/L) |
| Repeatability | ± 0.5% FS |
| Light source | LED 495 nm |
| Operation pressure | 5 Kg f/cm2 |
| Operating temperature | 0 – 60 °C |
| Process flow rate | Min. 0.1 m/sec |
| Response time | 30 sec |
| Protection | IP 68 |
| Temperature sensor | PT 100 |
| Temperature measurement range | 0 – 60°C |
| Temperature accuracy | ± 0.5 °C ; ± 0.1 °C (Optional) |
| Housing | Titanium; SS 316 L |
| Dimension | 25 Χ 146 mm |
| Weight | analyzer: approx. 450g; cable: 80 g/m |
[/wptab]
[end_wptabset]
Butuh Solusi untuk Kebutuhan Anda?
Temukan produk, layanan, dan solusi instrumentasi yang sesuai dengan kebutuhan industri, laboratorium, dan monitoring lingkungan Anda.
Artikel Terkait
Dissolved Oxygen Analyzer
Tanpa persyaratan kalibrasi dan konsumsi oksigen, pengukuran Dissolved Oxygen Analyzer memungkinkan dalam semua situasi, terutama di lingkungan konsentrasi oksigen yang sangat rendah.
[wptab name=’Fitur’]
- Onboard memory allowing users to easily configure , calibrate sensor at lab , distribute to various fields sites
- Solution without cabinet and water submersible enclosure
- Online real time measurement 1 second
- Ideal for out door applications , 0.02W ultra low power consumption
- Drift free and high reliability
- Digital communication 1.2 Km RS 485, minimize cabling , engineering cost
- Data monitoring software and configuration calibration
- Standard modbus RTU protocol, direct connected with PLC, HMI, and eliminate I/O module cost
- Temperature compensation
- Lightening and surge protection for power
[/wptab]
[wptab name=’Spesifikasi’]
| Measurement range | 0 – 20 ppm (mg/L) (0 – 200%) |
| Accuracy | ± 1% FS (0 – 20 ppm) |
| Resolution | 0.01 ppm (mg/L) |
| Repeatability | ± 0.5% FS |
| Light source | LED 495 nm |
| Operation pressure | 5 Kg f/cm2 |
| Operating temperature | 0 – 60 °C |
| Process flow rate | Min. 0.1 m/sec |
| Response time | 30 sec |
| Protection | IP 68 |
| Temperature sensor | PT 100 |
| Temperature measurement range | 0 – 60°C |
| Temperature accuracy | ± 0.5 °C ; ± 0.1 °C (Optional) |
| Housing | Titanium; SS 316 L |
| Dimension | 25 Χ 146 mm |
| Weight | analyzer: approx. 450g; cable: 80 g/m |
[/wptab]
[end_wptabset]
